Long Arrow Right External Link angle-right Search Times Spinner angle-left

V4 APN Settings for Blue Evo

For V4 devices that look like:  

undefined

You will need to factory reset the device. 

  • You can do this by holding the reset button located on the back of the device for 30 seconds with a paperclip or similar item. The device will reboot which takes about 1-2 minutes to fully complete.   
  • Connect a phone/tablet/computer to your Hotspot 

192.168.1.1/index.html#apn_setting -For the Infinity model, you'll see the infinity symbol on the bottom.  

192.168.100.1/index.html#apn_setting - For the Dynami model  

  • Change mode from auto to Manual 
  • Click Add New
  • PDP type: IPV4/V6
  • Profile Name(OTR Mobile) 
  • Enter: in the APN field vpn.accessmylan.net
  • Authentication: PAP 
  • Username: data 
  • Password: data 
  • Click apply then set as default(If the set as default and apply button are greyed out all you have to do is refresh the page and make sure you are only connected to the V4). APN is now set! (Or try turning off the LTE Connect Status button on the main page in green) 
  • Click reset connection at the top of the screen   
undefined

For V4 devices that look like:

undefined

*This device should auto-detect APNs in the case that it does not, please follow the directions below:  

Please type this in the URL field of your browser: 192.168.1.1/index.html#apn_setting

  1. Change mode from Auto to Manual 
  2. Please click the drop-down menu beside the 'Profile Field' drop-down menu. 
  3. You will then\ choose any out of the options provided and once one is selected you can have the place their cursor in the Profile Name & APN fields   
  • Profile Name: OTR Mobile 
  • APN: vpn.accessmylan.net
  • Authentication: PAP
  • PDP Type: IPV4/V6 
  • Username: data
  • Password: data 

Example below: 

undefined

Please Note:

undefined